「スイッチパスワード回復」の編集履歴(バックアップ)一覧はこちら
「スイッチパスワード回復」(2008/01/25 (金) 13:26:06) の最新版変更点
追加された行は緑色になります。
削除された行は赤色になります。
** スイッチパスワード回復
* Catalyst パスワード回復
Catalyst2950,3550におけるパスワード回復手順
+ 電源プラグを抜く
+ 電源プラグを差し込み、起動している間にパネル左側にある『mode』ボタンを押し続ける
+ ポート1xのLEDが消えてから1,2秒後にボタンを離す
+ 以下のような表示が出る
The system has been interrupted prior
to initializing the flash file system.
The following commands will initialize
the flash file system, and finish
loading the operating system software:
flash_init
load_helper
boot
&color(red){※「load_helper」は表示されないものもある}
+ flash_init と入力
>flash_init
+ load_helper と入力
>load_helper
+ dir flash: と入力
>dir flash:
&color(red){※flashの後の「:」は忘れずに};
+ コンフィグレーションファイル(パスワードの定義等を含む)をリネームする
>rename flash:config.text flash:config.old
+ 再起動する
>boot
+ Setupプログラムの起動(Nを入力)
>Continue with the configuration dialog?[Yes/No]:N
+ enableモードにする
>en
+ コンフィグレーションファイルの名前を元に戻す
#rename flash:config.old flash:config.text
+ メモリにコンフィグレーションファイルをコピーする
#copy flash:config.text system:running-config
Source filename[config.text]?(press return)
Destination filename[running-config]?(press return)
+ パスワードを変更する
#configure terminal
(config)#no enable secret
(config)#enable secret new_PassWord
+ 設定を保存する
#write memory
** スイッチパスワード回復
* Catalyst パスワード回復
Catalyst2950,3550におけるパスワード回復手順
+ 電源プラグを抜く
+ 電源プラグを差し込み、起動している間にパネル左側にある『mode』ボタンを押し続ける
+ ポート1xのLEDが消えてから1,2秒後にボタンを離す
+ 以下のような表示が出る
The system has been interrupted prior
to initializing the flash file system.
The following commands will initialize
the flash file system, and finish
loading the operating system software:
flash_init
load_helper
boot
&color(red){※「load_helper」は表示されないものもある}
+ flash_init と入力
>flash_init
+ load_helper と入力
>load_helper
+ dir flash: と入力
>dir flash:
&color(red){※flashの後の「:」は忘れずに};
+ コンフィグレーションファイル(パスワードの定義等を含む)をリネームする
>rename flash:config.text flash:config.old
+ 再起動する
>boot
+ Setupプログラムの起動(Nを入力)
>Continue with the configuration dialog?[Yes/No]:N
+ enableモードにする
>en
+ コンフィグレーションファイルの名前を元に戻す
#rename flash:config.old flash:config.text
+ メモリにコンフィグレーションファイルをコピーする
#copy flash:config.text system:running-config
Source filename[config.text]?(press return)
Destination filename[running-config]?(press return)
+ パスワードを変更する
#configure terminal
(config)#no enable secret
(config)#enable secret new_PassWord
+ 設定を保存する
#write memory